Used Brass Metal Industry Equipment Newsgroup

Location: CANADA, TORONTO ONTARIO

250 Ton Raster Straight Sided and Feed Line.
FOR SALE: 250 Ton Raster Straight Sided and Feed Line: Press Specifications: 1) Width between columns MM (INCH) 2200 86.6 Length 2000 78.7 2) Bed Area Depth 1000 39.3 Length 1900 74.8 3) Ram Area Depth 800 31.4 Length 1900 74.8 4) Effective Die Space Depth 1000 39.3 (Bolster Dia. Actual 1900X1111 (74.8 x 43.7) 5) Window Openings Length 1600 62.9 Depth 300 11.8 6) Opening in Bolster Length 1600 62.9 Depth 300 11.8 Counter Milled 400 x 1700 ( 15.75 x 66.9 ) 7) Ram Stroke 150 5.9 8) Shut Height Adj. up 650 23.6 Stroke Down 9) Shut Height Adj. Down 500 17.7 Stroke Down 10) Ram Adjustment 150 5.9 11) Window Opening Width 620 24.4 Above Bolste Height 450 17.7 12) Strokes Per Minute 30-150 13) Power Required 50KW 14) Height of Bed Above Floor 1200 47.2 15) Front & Back sliding guard doors 16) New Press Controls as per attached electrical control data. Feeder Specifications: 1) Feed Length max. 450 mm min. 00 mm 2) Strip Width max. 450 mm min. 10 mm 3) Strip Speed max. 45 m/min. 4) Material Thickness max. 5 mm min. 0.1 mm 5) Material Cross Section max. 500 mm 6) Feed Accuracy + 0,025 mm 7) Number of Strokes max. 150 r.p.m. 8) Strip Speed max. 35 m/min. with 120 degrees feeding mechanism 9) Number of Strokes max. 90 r.p.m. with 120 degrees feeding mechanism 10) Feed Length 10 - 450 .39-17.7 11) Strip Width 20 - 450 .78-17.7 12) Material Thickness Max. 5 .196 13) Feed Height Above Bolster 240 9.4 Feed Line Also Comes With: 1) Mandrel type un-coiler 2) Coil loader 3) Material Straightener 4) Material Support Roller Table The new electrical Press controls is comply with the new CSA Press safety code #Z142-02 and include the following: 1) Clutch and brake control. 2) Main motor controls. 3) Continuous arming circuit, c/w 2 stroke hold down before armed. 4) Electronic self checking brake monitor. 5) Motion detect monitor system. 6) Anti tie-down control circuit. 7) Anti-repeat control circuit. 8) Four user programmable cam outputs. 9) Angle display of crank position. 10) Operator interface and fault display touch screen. 11) Operator controls (Allen Bradley) 12) Heavy duty resolver. 13) Oil and dust tight type enclosure. 14) Electrical controls instruction/user manual. 15) Batch counter. 16) New palm button tee-stand 17) Clutch/brake valve. Dual 1''solonoid, high flow. 18) 8 point integral die protection system. Includes sensor interface module. Asking Price $185,000 Note: Equipment FOB - Our Shop-In Concord, Ontario Taxes not included Any damage caused after leaving our Shop is not our responsibility. Terms: 100% prior to loading on transport trucks.